上海翰粵自動哈系統有限公司

6ES7416-2XN05-0AB0SIMATIC S7-400，CPU 416-2 中央處理單元，帶： 5.6 MB 工作內存， （2.8 MB代碼，2.8 MB數據）， 1個接口 MPI/DP 12 MBIT/S， ，2個接口 PROFIBUS DP

上海翰粵是西門子工控及自動化產品授權分銷商歡迎來電咨詢！

聯系人：鄭轅鴻先生（銷售工程師） 

手機：13585754803                    商務QQ：1620718203

電話（TEL）:021-60531296      傳真（FAX）:021-57657276

郵箱:zx2013888@163.com          網站：www.hanyue.cc

24小時銷售技術服務熱線：13585754803

Overview

高端性能范圍內的高性能 CPU 適用于對性能要求很高的工廠 CPU 416-3 PN/DP 中集成了 PROFINET 功能

Functions

Block protection: 
A password concept protects the user program from unauthorized access. Integral HMI services: 
The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system. Integrated communications functions: PG/OP communication Shared data communication S7 standard communication S7 communication Firmware update using network

CPU 416-3 PN/DP  additional:

Open communication over TCP/IP， UDP and ISO-on-TCP (RFC1006) Distributed intelligence in Component Based Automation (CBA) on PROFINET Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs， e.g.

Multi-point interface MPI: Definition of station addresses. Startup/cycle behavior Stipulation of the maximum cycle time and communications load Address assignment: 
Addressing of I/O modules. Retentive ranges: 
Definition of the number of retentive bit memories， counters， timers， data blocks and clock memories. Size of the process image， local data. Length of the diagnostics buffer Protection level: 
Definition of access authorization for program and data System diagnostics: 
Definition of the handling and scope of diagnostic messages Timed interrupts: 
Setting of periodicity

CPU 416-3 PN/DP  additional:

PROFINET interface Parameterization of time synchronization using NTP procedure

Indication and information functions

Status and error indicators: 
LEDs indicate internal and external errors and operating states such as RUN， STOP， Restart， Test function， for example Test functions: 
The programming device can be used to display signal states in program execution， modify process tags irrespective of the user program， read out the contents of stack memories，